SmartLink580 system supports decentralized deployment and dynamic routing to implement rapid networking, and provides a wide range of wireless communication services in complex environments without relying on external networks and other equipment.
Light and Compact
The compact design and lightweight 3.2kg body make SmartLink580 easily delivered and rapidly deployed to the front line.
Rugged and Reliable
IP67 and MIL-STD-810G compliant, working temperature from -40℃~+60℃ (with chill-proof battery), all-weather operation.
Standard Compliant
Compliant with DMR standards, compatible with radios of mainstream DMR radio manufacturers.
IP Connection
Supports IP connection to the remote base station. In the case that the wireless Ad-Hoc link is disconnected, SmartLink580 can still communicate with the command center through the IP connection.
External Battery as Backup
SmartLink580 can use an external large-capacity 12V battery as backup power. When the power supply is suddenly interrupted, the battery can ensure supply power to the AD-Hoc device so that the system can work normally.
Carrier Network as Backup
Supports external accessory connection to ensure communication is completed through 4G carrier networks in case of disconnection with other Ad-Hoc nodes.
Flexible and Dynamic Networking
Supports flexible and dynamic networking modes including chain, star, tree, and hybrid, which can be flexibly changed without modifying parameters or adjusting the layout.
Wide Network Coverage
Well-optimized RF circuit design renders the ad-hoc network a good wireless performance and achieves a long distance of network coverage.
Item | Specification | |
General | Protocol | ETSI TS 102 361-1,-2,-3 |
Frequency | UHF3: 350-400MHz, UHF1: 400-470MHz, VHF:136-174MHz | |
Channel Spacing | 12.5kHz | |
Ad-Hoc Network Maximum Nodes | Up to 32 Nodes in chain mode | |
Size (H×W×D) | 320×190×70mm | |
Weight | 3.2Kg | |
Power Supply | DC 12V-18V input External Power Adaptor External Solar Power External Backup Battery | |
Internal Battery Capacity | 236Wh @ 14.8V | |
Standby Current | < 0.55A | |
Transmission Current | 10W Transmission Power < 4A 25W Transmission Power < 5A | |
Location | GPS/Beidou | |
Vocoder | AMBE++ | |
4G module | Optional | |
Interface | Main antenna RF interface x 1 Gps/ Beidou antenna interface x 1 4G module main antenna interface (optional) x 1 4G module secondary antenna interface (optional) x 1 Main power interface x 1 Battery floating charge interface x 1 LAN network interface x 1 WAN network interface x 1 USB interface x 1 UART interface x 1 | |
Transmitter | Frequency Stability | ±0.5ppm |
Output Power | 1W - 25W | |
4FSK Digital Modulation | 12.5KHz Data: 7K60FXD 12.5KHz Voice and Data: 7K60FXE | |
Conducted/Radiated Emission | -36dBm 1GHz, -30dBm >1GHz | |
Modulation Limiting | ±2.5KHz @12.5KHz | |
Adjacent Channel | Power -60dB@12.5KHz | |
FM Hum and Noise | -40dB@12.5kHz | |
Audio Response | +1～-3dB | |
Audio Distortion | ≤3% (Typical) | |
Receiver | Frequency Stability | ±0.5ppm |
Sensitivity (Digital) | 0.14uV（5% BER） | |
Intermodulation | 75dB (TIA603D) 70dB (ETSI) | |
Adjacent Channel Selectivity | 65dB@12.5 kHz（TIA603D） 65dB@12.5 kHz（ETSI） | |
Spurious Rejection | 80dB ( TIA603D ) 80dB ( ETSI ) | |
Blocking or Desensitization | 98dB ( TIA603D） 95dB ( ETSI） | |
Hum and Noise | -40 dB@12.5KHz | |
Conducted Spurious Emission | -57 dBm | |
Audio Response | +1～-3dB | |
Audio Distortion | 3% (Typical) | |
Environmental | Operating Temperature | -40℃ ~ +60℃ |
Storage Temperature | -50℃ ~ +85℃ | |
Dust and Water Resistance | IP67 | |
Reliability | MIL-STD-810G | |
GPS Location | Accuracy specs are for long-term tracking (95th percentile values>5 satellites visible at nominal -130 dBm signal strength) | |
TTFF (Time To First Fix) Cold Start | <60s | |
TTFF (Time To First Fix) Hot Start | <10s | |
Horizontal Accuracy | <10m | |
Ready to Talk to One of the Caltta Experts?
Tel: +86-0755-86556659
E-mail: sales@caltta.com
12F, Building G2, International E-City, Nanshan, Shenzhen, China
+86-0755-86556659
